Ronson's Blog
  • Home
  • Shuttlecock Game Log
Sign in Subscribe
roomba

Connecting Roomba to WiFi (Android)

Ronson Chan

May 23, 2023
  1. Factory reset your Roomba
  2. Set up your Roomba
  3. App will say successfully connected, Roomba will still be blinking Green
  4. Turn off Roomba by holding the clean button
  5. Turn on Roomba and it should not be connected to Wifi

Sign up for more like this.

Enter your email
Subscribe

OpenWRT + Failover with mwan3

I wanted to create a backup connection to my network in case my main OPNSense firewall went down.  I only want the backup connection online, if the main one goes offline. 1. Setup OpenWRT on RPi3 2. Installed mwan3 3. Tried to follow the guide in OpenWRT Wiki 4. Nothing
Jun 5, 2022 2 min read

OPNSense Selective Routing for Specific Networks (Websites)

Goal:  Route specific websites through Wireguard VPN tunnel Caveat: With the use of CDNs, this doesn't work really well.  i.e. the CDN redirects you to different IPs, and each time you resolve the domain, it gets a different IP, so it doesn't always get routed through the VPN tunnel
Feb 20, 2022 1 min read

Fibrestream + VLAN = Packet Loss by LLDP

TL;DR If you use Fibrestream as your ISP and put it on a VLAN, make sure the port it's connected to has LLDP disabled.  If not, you'll have constant packet loss. Fibrestream is my ISP and they provide internet over CAT5 DHCP. With more time on my hands, I
Apr 10, 2021 1 min read
Ronson's Blog © 2023
Powered by Ghost